MANUFACTURER menu
11
[
ALRM mhO
] o
[
NoAL mhO
]
ALarM in the case of lack of speed during rewinding (m/h = 0). The alarm consists in the stopping of irrigation.
Or, "No Alarm at m/h = 0". In this case, in the event of zero speed, irrigation is not stopped but the machine remains on
standby, indicating [m/h ZERO].
Pressing _>_ takes you to a sub-menu with the following options:
[
DSRA mhO
]
[
ENRA mhO
]
[
ENMA mhO
[
ENRU mhO
]
[
ENMU mhO
]
=>DiSables Reading by the Assistance (the option does not appear on the Assistance menu)
=>ENables Read by the Assistance
=>ENables Modification by the Assistance
=>ENables Read-only by the User.
=>ENables Modification by the User
[
OUTPUTS
]
Management of output sources: OU1, OU2 and OU3 (the last one appears on RAIN V.03 boards and following models).
Pressing _>_ takes you to a sub-menu with the following options:
[
OU1 DIS
]
[
OU1 ENAB
]
=> Auxiliary outlet 1 => DISabled
=> Auxiliary outlet 11 => ENabled.
Pressing _>_ takes you to a sub-menu with the following options:
[
ENMA OU1
]
[
ENRA mhO
]
[
ENRU OU1
]
[
ENMU OU1
]
=> ENables Modification by the Assistance
=>ENables Read by the Assistance
=> ENables Read by the User
=>ENables Modification by the User
Pressing _v_ takes you to a sub-menu with the following options:
[
OU1 O'
]
Programming of time of activation (up to 250 minutes) of outlet OU1for
managing an Auxiliary Valve (maximum load 300 mA). Offers two options
for counting time: from the start of irrigation, or before the end.
Pressing _>_ takes you to a sub-menu with the following options
[
OU1 END
]
[
OU1 BIG
]
activate Auxiliary Valve 1 from the START, or before the END, of
irrigation.
[
OU2 DIS
]
[
OU2 ENAB
]
=> Auxiliary outlet 2 => DISabled
=> Auxiliary outlet 2 => ENabled.
Reminder: this outlet is not implemented by now.
Pressing _>_ takes you to a sub-menu with the following options:
[
ENMA OU2
]
[
ENRU OU2
]
[
ENMU OU2
]
=>ENables Modification by the Assistance
=>ENables Read-only by the User.
=>ENables Modification by the User
[
OU3 DIS
]
[
OU3 ENAB
]
=> Auxiliary outlet 3 => DISabled
=> Auxiliary outlet 3 => ENabled.
Reminder: this outlet is not implemented by now.
Pressing _>_ takes you to a sub-menu with the following options:
[
ENMA OU3
]
[
ENRU OU3
]
[
ENMU OU3
]
=>ENables Modification by the Assistance
=>ENables Read-only by the User.
=>ENables Modification by the User
[
INPUTS
]
Management of input sources: IN1, IN2, IN3 and 4-20mA.
Reminder: the inlets IN1, IN2, IN3 are activated when they are switched to ground through a signal or a contact.
Pressing _>_ takes you to a sub-menu with the following options:
[
IN1 WIND
]
[
IN1 STOP
]
[
IN1 SUSP
]
[
IN1 STAR
]
[
IN1 DIS
]
=> This function has to be implemented
=>Auxiliary inlet 1 => Enabled to receive a signal from the outside to give a command STOP
irrigation (to be implemented).
=> Auxiliary inlet 1 => Enabled to receive a signal from the outside to give a command PAUSE
irrigation (to be implemented).
=> Auxiliary inlet 1 => Enabled to receive a signal from the outside to give a command START
irrigation.
=> Auxiliary outlet 1 => DISabled
Pressing _>_ takes you to a sub-menu with the following options:
[
ENMA IN1
]
[
ENRU IN1
]
[
ENMU IN1
]
=>ENables Modification by the Assistance
=>ENables Read-only by the User.
=>ENables Modification by the User
