Start italiana MAGLINK 16T, Руководство по установке

Страница: 12 / 48

Maglink 16T rev.08 2015-07 - ENG
12
L1 : Working led
L4 : Relay1 status led
L5 : Relay2 status led
L6 : Probe power status led
L7 : Relay3 status led
L8 : Relay4 status led
L9 : Input6 status led
L10 : Input5 status led
L11 : Input4 status led
L12 : Input3 status led
L13 : Input2 status led
L14 : Input1 status led
L15 : Relay5 status led
L16 : Relay6 status led
L17 : Relay7 status led
L18 : Relay8 status led
L19 : Relay9 status led
L20 : Relay10 status led
L21 : Relay11 status led
L22 : Relay12 status led
L23 : Relay13 status led
L24 : Relay14 status led
L25 : Relay15 status led
L26 : Relay16 status led
S1
: Dip switches
SG1 : Buzzer
SV1 : Modem connector
SV2 : Can-bus connector
SV3 : TFT-LCD panel connector
DIP SWITCH SETTINGS
S1: DIPSWITCH
 DIPSW1 OFF = Console Config, printer or DCD connection
 DIPSW1 ON = Double Gilbarco protocol enabled for Site Manager web application
 DIPSW2 OFF = enable connector CN10 for connection to printer and input to enable/disable antitheft function
 DIPSW2 ON = enable connector CN10 for connection to up to 6 reed sensors
 DIPSW3 ON = antitheft managed by input nr. 2 (from fw version 5.0.2)
 DIPSW3 OFF = antitheft managed by front panel (from fw version 5.0.2)

DIPSW4 ON = inverse relay activated

DIPSW4 OFF = normal relay activated

DIPSW5 ON = last 10 deliveries (from version 6.0.0)

DIPSW5 OFF = last delivery (from version 6.0.0)

DIPSW6 ON = all memory cleared with default value at the power up system reset

DIPSW6 OFF = normal operation