haaga 677 / 697 / 697 plus
35
EN
1. General
This operating manual applies to the haaga 677
sweeping machine (year of manufacture: from
2019), the haaga 697 sweeping machine (year of
manufacture: from 2019) and the haaga 697 plus
sweeping machine (year of manufacture: from
2019) and is only valid for the named machines.
This operating manual provides important
information for the safe and efficient use of the
machine.
A requirement for safe operation of the machine
is the adherence to all of the safety and operation
instructions provided.
• Read the operating manual carefully before
using the device.
• Read the safety instructions!
• Keep the operating manual safe and
accessible during the lifespan of the device.
• Pass the operating manual onto any
subsequent owner or user of the device.
1.1 Address
Haaga Kehrsysteme GmbH
Hans-Zinser-Str. 1-3
73061 Ebersbach
Tel.: +49 (0)7163 9988-280
Fax: +49 (0)7163 9988-290
www.haaga-gmbh.de
1.2 Conventions
To be able to work optimally with the operating
manual, please note the following explanations of
the typographical conventions.
Numbering
•
The texts shown are first level numbering
points.
Work sequence
1.
Step 1 of the work sequence
2.
Step 2 of the work sequence
3.
Step 3 of the work sequence
The sequence of the work steps must be
observed.
Tip
» Tips and notes (not machine damage) are
shown like this.
1.3 Symbols and labels
All warnings and safety instructions must be
complied with! Always take care during operation
in order to avoid accidents, personal injury and
damage to property.
Safety instructions
SIGNAL WORD
Type and source of hazard
Possible consequences
• Measures for avoiding danger
Risk level
Risk level
Probability
of occurrence
Consequences
in the event of
noncompliance
DANGER
Direct
Death, serious injury
WARNING
Possible
Death, serious injury
CAUTION
Possible
Slight injury
NOTE
Possible
material damage
1.4 Limitation of Liability
Haaga Kehrsysteme GmbH does not accept any
liability for damage and consequential damage
caused by the following points:
• Failure to observe the operating instructions
•
Use of nonapproved replacement parts /
wrong spare parts / spare parts that do not
correspond to the manufacturer's specification
•
Unauthorized changes, additions to and
modifications to the device
1.5 Warranty
The provisions that are described in the general
terms and conditions of Haaga Kehrsysteme
GmbH apply.
General