Starmix Airstar H-C1 M, Руководство по эксплуатации

Страница: 18 / 40

18
en
The device is intended for commercial use, for example for use in hotels, public baths, fitness
studios, spas, saunas, public facilities, industries and businesses.
The manufacturer does not accept liability for damages caused by misappropriation, inappro-
priate usage or incorrect repairs.
Avoid danger from electric shocks and fire
Attach the height adjustment for hair dryers out of reach of persons using a bathtub or
shower.
Have the cross-section of the electrical connecting cable determined by a specialist on site.
Connect the height adjustment to the protective conductor system.
Electrotechnical work may only be carried out by qualified electricians or under their direc-
tion and supervision.
The power supply must be protected on site with a residual current circuit breaker (RCD) for
a maximum rated residual current of 30 mA.
The voltage on the rating plate must match the mains voltage. Only connect the vacuum
cleaner to a sufficiently protected electric socket.
Do not pull the mains connection cable over sharp edges, do not bend it or clamp it. Only re-
place a damaged mains connection cable with one meeting the specifications in the Technical
Data chapter.
Do not operate the device including the accessories in the following cases:
– Power cord is defective or has cracks
– Device is noticeably damaged, e.g. by cracks in the housing
– If an invisible defect is suspected, e.g. after a fall or impact
In the following cases, unplug the power cord, switch off the circuit breaker or unscrew the
fuse:
– When the device makes unusual noises
– Before any maintenance or cleaning
When unplugging, only pull on the mains plug and not on the mains connection cable. Never
touch the mains plug with wet hands.
Avoiding risks during installation
For the installation and operation of the device, please observe:
– The national and regional regulations
– The technical regulations and guidelines
– The provisions of the local authorities