Starkey Custom Charger, Руководство по эксплуатации

Страница: 7 / 11

Charger Troubleshooting Guide
SYMPTOM POSSIBLE
CAUSES SOLUTIONS
Hearing aids
whistling in
the charger
Incorrect
hearing aid
orientation
Reposition your hearing
aids in the charging ports/
posts. Confirm that the
charging LED begins to
glow.
Depleted on-
board battery
Your charger’s on-board
battery may be fully
depleted. Apply external
power to your charger. If
you do not have the cord,
push and hold the hearing
aid’s user control for three
seconds to turn it off.
Regulatory Information | 13 12 | Troubleshooting
Safety Information
INTENDED USE:
An air conduction hearing aid is a wearable sound-
amplifying device intended to compensate for impaired hearing. Hearing aids
are available in multiple gain/output levels appropriate to treat hearing losses
ranging from mild-to-profound.
Your hearing aids are designed to operate in public and residential environments
and are designed to comply with international Electromagnetic Compatibility
emissions and immunity standards for medical devices. However, it is still possible
that you may experience interference caused by power line disturbances, airport
metal detectors, electromagnetic fields from other medical devices, radio signals
and electrostatic discharges.
If you use other medical devices or wear implantable medical devices such as
defibrillators or pacemakers and are concerned that your hearing aids might
cause interference with your medical device, please contact your physician
or the manufacturer of your medical device for information about the risk of
disturbance.
Your charger should not be worn during an MRI procedure or in a hyperbaric
chamber.
Your charger is not formally certified to operate in explosive atmospheres such as
may be found in coal mines or certain chemical factories.
Your charger should be stored within the temperature and humidity ranges of
-10°C (14°F) to +45°C (113°F) and 10%-95% rH.
The charging temperature range is between 0°C (32°F) and 40°C (104°F).
Cautions:
• If the charger is hot, do not touch it until cool.
• If the charger is not working, do not disassemble. Due to a shock hazard, please
send in for repair.
• Keep out of reach from children. Do not ingest anything in the package,
including desiccant, cleaning tool, etc.
• Any cords and AC adapters must be approved or listed by a Nationally
Recognized Testing Laboratory.