Starkey Custom Charger, Руководство по эксплуатации

Страница: 4 / 11

Operation | 7 6 | Operation
Charging Your Hearing Aids
• Place your hearing aids in the charger
– Standard Charger: place hearing aids into
charging ports with earbuds/earmolds resting
in the reservoir
– Custom Charger: place hearing aid faceplate
facing downward so battery contacts on
hearing aid align with charging posts within
charger
• Hearing aids will turn off automatically and begin
to charge
• The LEDs corresponding to each hearing aid:
– Glowing Green = Charging
– Solid Green = Fully Charged *
– Blinking Red = Fault State. To reset, remove
the hearing aids from charger, wait until LED
turns off and re-insert aids. If Fault State
continues, call your hearing professional.
• When charging without the charger cord, the
LEDs turn off when the hearing aids are fully
charged to preserve the on-board battery.
• Charging occurs with the lid open or closed
• Hearing aids will be fully charged in under 3 ½
hours
• It is safe to store hearing aids in the charger after
they are fully charged and any time that you are
not wearing them
• Hearing aids will automatically power on when
removed from the charger
• To illuminate LEDs when the charger is not
plugged in, remove a hearing aid from its
charging port/post for three seconds and then
reinsert it. LEDs illuminate for 10 seconds before
turning off.
• The desiccant puck provided with the Standard
Charger will be effective for 3-6 months
depending on moisture in the hearing aids and
humidity. When the desiccant puck fades from
blue to white, it should be replaced.
• If you will not be wearing your hearing aids for
an extended period of time (i.e. weeks), remove
both the plug from the charger and the hearing
aids from the charging ports/posts. You will
need to manually power off the hearing aids by
pressing the user control on each hearing aid for
three seconds.