background image

Premium Charger Troubleshooting Guide

SYMPTOM

POSSIBLE 
CAUSES

SOLUTIONS

Hearing aids 
whistling in 
the charger

Incorrect 
hearing aid 
orientation

Reposition your hearing 
aids in the charging ports/
posts� Confirm that the 
charging LED begins to 
glow�

Depleted on-
board battery

Your premium charger’s 
on-board battery may 
be fully depleted� Apply 
external power to your 
premium charger� If you 
do not have the cord, 
push and hold the hearing 
aid’s user control for three 
seconds to turn it off�

Regulatory Information   |   13 

12   |   Troubleshooting Guides

Safety Information

INTENDED USE: 

This hearing aid charger is intended to charge  

lithium-ion rechargeable hearing aids, and is to be used with the patient’s 

selected hearing aid solution� For information about your hearing aid, please 

consult the hearing aid specific Operations Manual�
Your premium charger should not be used during an MRI procedure or in a 

hyperbaric chamber� 
Your premium charger is not formally certified to operate in explosive 

atmospheres such as may be found in coal mines or certain chemical factories�

10% rH

95% rH

-10 C

45 C

     Your charger should be stored and transported within 

the temperature, humidity, and pressure ranges of -10°C 

(14°F) to +45°C (113°F),10%-95% rH, and 70 kPa – 106 kPa 

(equivalent to altitudes from 1,200 ft (380 m) below sea level 

to 10,000 ft (3,000 m)� 

The charging temperature range is between 10°C (50°F) and 40°C (104°F) and 

between 10%-95% RH and 70 kPa-106 kPa� 
Caution:
• If the charger is hot, do not touch it until cool�
•  If the charger is not working, do not disassemble� Due to a shock hazard, please 

send in for repair�

• Keep out of reach from children� Do not ingest anything in the package, 

including desiccant, cleaning tool, etc�

• Any cords and AC adapters must be approved or listed by a Nationally 

Recognized Testing Laboratory�

Any serious incident that has occurred in relation to your Starkey device should 

be reported to your local Starkey Hearing Technologies representative and 

the Competent Authority of the Member State in which you are established� A 

serious incident is defined as any malfunction, deterioration in the characteristics 

and/or performance of the device, or inadequacy in the device Operations 

Manual/ labeling which could lead to the death or serious deterioration in the 

state of health of the user, OR could do so upon recurrence�

Содержание Premium Custom Charger












Отзывы: