Starkey Hearing Technologies Premium Custom Charger, Руководство по эксплуатации

Страница: 4 / 11

Operation | 7 6 | Operation
Charging Your Hearing Aids
• Place your hearing aids in the charger:
– Premium Standard Charger: place hearing aids
into charging ports with earbuds/earmolds
resting in the reservoir�
– Premium Custom Charger: place hearing aid
faceplate facing downward so battery contacts
on hearing aid align with charging posts within
charger�
• When hearing aids are placed in the charger, they
will automatically turn off and begin to charge�
When hearing aids are removed from the charger,
they will automatically power on�
• The LEDs corresponding to each hearing aid:
– Glowing Green = Charging
– Solid Green = Fully Charged *
– Blinking Red = Fault State� To reset, remove
the hearing aids from charger, wait until LED
turns off and re-insert aids� If Fault State
continues, call your hearing professional�
• Charging occurs with the lid open or closed;
hearing aids will be fully charged in under 3 ½
hours
• It is safe to store hearing aids in the charger after
they are fully charged and any time that you are
not wearing them�
• If you will not be wearing your hearing aids for
an extended period of time (i�e�weeks), remove
both the plug from the premium charger and the
hearing aids from the charging ports/posts�You
will need to manually power off the hearing aids
by pressing the user control on each hearing aid
for three seconds�
• To illuminate LEDs when the premium charger
is not plugged in, remove a hearing aid from its
charging port/post for three seconds and then
re-insert it� LEDs illuminate for 10 seconds before
turning off�
• The desiccant puck provided with the Premium
Standard Charger will be effective for 3–6 months
depending on moisture in the hearing aids and
humidity� When the desiccant puck fades from
blue to white, it should be replaced�
* If you are charging without the cord, the LEDs will turn off when the hearing aids are
fully charged to preserve the on-board battery.