Starke Arvid AB Tel: +46 522 - 22 000 Fax: +46 522 - 22 344
Lyckåsvägen 3
www.starkearvid.se [email protected]e
SE-459 30 Ljungskile
Sida
9
av
25
Special work
The setting, maintenance, inspection activities and deadlines, including information on re-
placement of parts and modules stipulated in these operating instructions must be ob-
served. These activities may only be performed by authorised specialists.
Only perform maintenance and repair work when the machine is positioned on flat ground
with sufficient bearing capacity and is secured so that it cannot roll away or collapse.
Clean machines, particularly connections and screw connections at the beginning of
maintenance/repair work. Do not use aggressive cleaning agents! Use lint-free cloths for
cleaning.
Never clean the machine with water or steam jet (high-pressure cleaner).
After cleaning, inspect all vacuum lines for leaks, loosened connections, abrasion and
damage. Repair any flaws immediately!
Always tighten screw connections loosened during maintenance and repair work.
Safety instructions for special types of danger
Electrics
Use only original fuses with the specified current strengths.
Switch off the machine immediately during malfunctions to the electrical energy supply.
Work on electrical equipment or operating materials may only be performed by an electri-
cian or by trained personnel under the direction and supervision of an electrician in ac-
cordance with the rules and regulations of electrical engineering.
Machine and system parts on which inspection, maintenance, or repair work must be per-
formed, must be switched free of current if required. First check the switched off parts to
ensure that they are free of voltage, then ground and short-circuit them, and insulate
neighboring live parts.
The electrical equipment of the machine must be checked regularly. Flaws such as loose
connections and melted cables must be repaired immediately.
Oils, greases, and other chemical substances
Observe the safety regulations applicable for the product when using oils, greases, and
other chemical substances!
