Starke Arvid AB Tel: +46 522 - 22 000 Fax: +46 522 - 22 344
Lyckåsvägen 3
www.starkearvid.se [email protected]e
SE-459 30 Ljungskile
Sida
20
av
25
Switching off
After completing transport work, switch the machine off using the switch (3) to conserve
the battery power.
Charging the battery
Check the device for any external damages or flaws.
Compare the connection on the power supply network with regard to voltage, current, and
mechanical connection (plug connection) with the necessary data for the vacuum pumps If
they do not correspond, the machine may not be operated.
Connect the device to the mains power supply at the plug (9).
The charging procedure can be checked in voltage display.
After the charging procedure is completed, a value of 100% must be visible in the voltage
display when Test button is pushed.
The battery is charged after a maximum of 12 hours.
Remove the extension cable from the mains power supply.
This completes the charging.
