BeiJing Starfire Control Technology Co.,Ltd
WeChat:18901200180
QQ: 1908817881
30
large programs, the picture will take a long time.
[calculation control precision] : automatically optimize the program line to ensure smooth cutting, and the
recommended value is 0.01.
[remote control selection ] : 0 -- do not test the remote control; 1 -- select the wired remote control; 2 -- select the
wireless remote control.
[automatic coordinate clearing before machining] : when set as 1, the current coordinate is set as 0 automatically
before cutting, generally used in the case that there is no G92 at the beginning of the program.
[pneumatic height adjustment] : when set to 1, select pneumatic height adjustment; At this point, only the cut gun
down output signal, cut gun up no output.
[automatic reference at the end of processing] : when set to 1, the end of cutting will automatically return to the
starting point of cutting.
[effective external limit] : 0 -- no detection of external limit signal, 1 -- detection.
0 -- soft limit range is not detected, 1 -- detection, limit range can be set in system parameters.
[effective detection of bump gun] : 0 -- signal of bump gun is not detected; 1 -- detection.
[pause/lift after bump gun] : 0 -- cut pause after bump gun; 1 -- the cutting gun rises after the collision (the rising time
is determined by plasma parameter the positioning delay of the cutting gun), and the cutting is not suspended.
0 -- startup shows the company logo; 1 - display blue back company name on startup.
[frog jump function] : when set to 1, the frog jump function will be turned on, and the cutting gun will automatically
rise and fall in the empty line, saving time.
[drill opening delay] : the waiting time after the drill is opened when drilling function is used.
[times of drilling and chip removal] : generally, it is not possible to drill through the thick plate at one time, and The
Times of chip removal need to be set.
[drilling chip removal time] : refers to the time of each drop of the drill bit, when the time comes, the chip will be
automatically removed.