BeiJing Starfire Control Technology Co.,Ltd
WeChat:18901200180
QQ: 1908817881
20
2) cutting return
First perforation, and then along the cutting speed along the line from the current position to adjust the starting point,
do not stop according to the original trajectory to continue processing, a bit like epitaxial perforation, so that the
perforation point more smooth;
3) offset cutting
Punch first, adjust the current coordinate to the coordinate when suspended, and continue processing according to
the original track to realize the function of transfer punch.
Note: 2) and 3) fully preheat (flame condition) before operation, as perforation will occur as soon as operation is
selected.
The normal procedure is to preheat the flame and press the start button to make a choice.
4.3 original track back processing
In the process, if the original track needs to be retreated due to non-cutting, it can be processed as follows:
Press the key
to make the running system slow down and stop. The system displays the "pause" mark and
prompts the figure below.
Press the [F1] key to perform the original track regression of the system, and the regression speed is set in the
parameter -- speed -- regression speed.
