18
4.6、
The edge of the thick plate perforation
1)
In the automatic processing, need to use edge perforation method for thick plate processing
。
2)
edge of the perforation of the method is: will be in front of the punch cutting torch to move to the edge of the
plate recently.
3)
Start preheating, when after the preheating, press
【start】
key
，
Cutting along a straight line and the selected cutting
speed cutting to punch, cutting processing again.
4)
USES the edge notch, the first change parameter control menu of edge notch choice to 1 (said to choose
effective).So every hole, the first prompted the diagram below:
Location perforation
System position and perforation, for inner hole in common use
Select Edge of the hole
1
）
The operator can press
【↑】【↓】【←】【→】，
Adjust the position of the cutting torch to the outer limits of the
steel plate, start preheating;
2
）
When after the preheating, press【start】
key
，
Cutting along a straight line distance and the selected
cutting speed to punch, cutting processing again.
Don't perforat
No perforation, system run directly from the current perforation position.Blank line to the next hole, a new perforation tip.
