Starcraft STARFLYER 2015, Руководство пользователя

Страница: 63 / 152

STARCRAFT TOWABLE SECTION 4 – TOWING & SET-UP
SCT 4-13
U
NHITCHING
Y
OUR
C
AMPING
T
RAILER
1. Position the RV as desired.
2. Level the RV (side-to-side).
3. Block the wheels securely to prevent the RV from moving.
4. Unhook the wire harness/connector plug, safety chains and breakaway switch
lanyard.
5. Install the dolly wheel or platform.
6. Release the weight distributing bars (customer supplied).
7. Open the tongue jack coupler latch.
8. Turn the tongue jack crank to raise the coupler above the hitch ball.
9. Level the RV (front-to-back) with the tongue jack crank.
10. If applicable, lower the stabilizer jacks.
11. Pull the tow vehicle away, as desired.
S
EASONING
T
HE
N
EW
T
ENT
Well in advance of your first trip, set up your new RV. Use a garden hose and
thoroughly soak the tent with a light spray of water (do not spray directly on the
tent with a high pressure hose). After the tent dries, repeat the soaking process
three additional times.
If you note any water seepage or leaks after seasoning your tent let the tent dry,
then spray water repellant using the instructions provided on the product
container. One or more applications of seam sealer may be necessary to stop
water seepage in seams where thread enters the fabric. Water repellant products
and tent seam sealers are usually available where tent or camping supplies are
sold.
Once performed, the new tent seasoning process (described above) does not
need to be repeated unless a section of your tent is replaced.
T
ENT
S
ET
U
P
CAUTION
It is very important to “season” your new tent. If you do not follow this
procedure, you may experience some water seepage during the first few
exposures to rain.
WARNING
Do not use the bed braces if they are bent or damaged. Contact your dealer
to replace any damaged brace(s).