Starck Sefam S.Box, Руководство по обслуживанию, Страница: 52 / 56

52  Maintenance Sefam S.Box

Connect the display ribbon into the main board connector (Fig.1).

Lock the connector (Fig.2).

Place the IP protection on the main board. Place the IP protection carefully on the capacitor
(Fig.1).

Slide the IP protection tabs between the edge of the main board and the bottom cover.
(Fig.2).

Place the top cover (check that it is inserted into the rear panel rib).

Close the top cover by tightening the 4 screws with T10 tip equipped screwdriver, until it
locks.
Fig.2
capacito
r
Tabs
Fig.1
Fig.1
Fig.2