Starck Sefam S.Box, Руководство по обслуживанию, Страница: 49 / 56

Sefam S.Box Maintenance  49

Engage the elbow seal on the pressure/flow sensor, while positioning the 3 ribs at the bottom
of the rear cover on the bottom cover.

Screw with a T6 tip equipped screwdriver, until it locks.

Connect the pressure / flow sensor and humidifier cables to the main board (sensor cable
passing in front of the humidifier cable).

Place the main board on the bottom cover. Align the back of the main board with the rear
cover, while positioning the pressure/flow sensor cable between the 2 capacitors.

Place the connector board in its back cover slot (insert the connectors in their slots).
Screw
Humidifier
connection
Sensor
connection
Humidifier cable in
front
of sensor
cable
Sensor
cable
passage