Starck Sefam S.Box Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 56

Starck Sefam S.Box Скачать руководство пользователя страница 28

28



Troubleshooting tips

Sefam S.Box

Troubleshooting tips

Device Messages

Message on the
display

Possible cause

Proposed solution

The mask is
disconnected.

Check the connection between the mask, the
breathing tube and the device. This message
disappears once you breathe into your properly

reconnected mask or press the

or

button.

This symbol

flashes on screen.

The device detected an
operating error in the
heated humidifier.

The  device  is  operating  without  the  heated
humidification function.
The  corresponding  error  code  is  registered  in
the memory  of the machine  and is  accessible
by using the SEFAM Analyze software.
Refer to the section "Error messages".

This symbol

flashes on screen.

The device has detected a
malfunction of the S.Box
heated tube with ATC.

The  device  is  operating  without  using  the
function of the heated tube.
Check the tube connections to the device.
Unplug the device from all power sources. Plug
it in again and turn it on.
If  the  problem  persists,  contact  Technical
Support Service.

The symbol

flashes quickly on
the status bar
display.

The  SD  card  is  either  not
inserted  or  not  properly
inserted in the device.
The  SD  card  is  locked.

The SD card is 90% full, or
more.
SD card error.

Insert the SD card properly into the SD card
slot.

Unlock the SD card and reinsert it into the
SD card slot.
Delete files on the SD card and give it back to
the patient.
Give a new SD card to the patient.

The error code
flashes.
(

XX = 2 figures)

.

The unit detected an
operating error.

Refer to the section "Error Messages".

«
...
26
27
28
29
30
...
»

Содержание Sefam S.Box

























































Отзывы:

Нет отзывов