- 9 -
under Time Digital
nORmAL Time DiSPLAy
1. Press “ ” for time display.
2. Press “ ” again immediately for date display.
3. After time or date display, message will scroll. Display will automatically turn off after
message scrolling is complete.
Time AnD DATe SeTTing
1. Press “ ” for time display.
2. Press and hold “ ” immediately for 2 seconds to enter setting mode; 12/24-hour format will
begin flashing.
3. Press “ ” to select 12/24 hour format.
4. Press “ ” to advance to hour.
5. Press “ ” to increase digits; press and hold “ ” for fast advance.
6. Press “ ” to advance to next setting value.
7. Setting sequence is: 12/24-hour format, hour, minutes, year, month, date
8. Press “ ” to save and exit setting mode.
NOTE: If no pusher is operated for 7 seconds, settings will be saved and the display will
automatically turn off after message scrolling is complete.
meSSAge SeTTing
1. Press “ ” two times for date display.
2. Press and hold “ ” immediately for 2 seconds to enter setting mode; first character will begin
flashing.
3. Press “ ” to change the character.
4. Press “ ” to advance to next character.
NOTE: Maximum message length is 10 characters.
NOTE: Default message is: “BE STUPID”. When the battery is replaced, message will reset to
default message.
Clear LCD Digital instructions
• Time 1 + 2
• Date
• World Time
Time
normal Time mode:
1. When in Time 1 mode, press “•” for quick view of Time 2, and vice versa.
2. Press and hold “•” to change time display between Time 1 and Time 2.
3. Date will be display in bottom right hand corner of display with month on top.
Setting Time and Date:
Time 1 and Time 2 are set separately. Before setting, time display must be changed to Time 1 or
2 depending on which needs to be set.
1. Press and hold “ ” for 3 seconds to enter time and date setting mode. 12/24 Hour
selection will begin flashing.
2. Press “•” to toggle between 12 and 24 hour display mode. Press “ ” to change to hour
display.
3. Press “•” to advance the hour. Press “ ” to change to minute display.
4. Press “•” to advance the minute. Press “ ” to change to seconds display.
5. Press “•” to reset seconds to “00”. Press “ ” to change to year display.
6. Press “•” to advance year. Press “ ” to change to month display.
7. Press “•” to advance month. Press “ ” to change to date display.
8. Press “•” to advance date. Press “ ” to exit time and date setting mode.
NOTE: In setting mode, time will automatically return to normal time mode if no buttons are
pressed for 30 seconds.
Time 2 Display
Indicator
Month Display
Date Display
