- 12 -
Clink Digital
nORmAL Time DiSPLAy
1. Press “•” to change mode; mode sequence is time, timer, alarm and chronograph.
2. Press “ ” for EL. Press and hold “ ” to toggle auto EL on/off. When auto EL is on, pressing any pusher will turn
on EL for 3 seconds.
3. Press “ ” to toggle hourly chime on/off.
4. Press “ ” to flash time zone 2. Press and hold “ ” to toggle time zone 1/time zone 2.
NOTE: In any setting, if no pusher is operated for 2 minutes, any changes will not be saved and the setting will
automatically return to display mode.
Time AnD CALenDAR SeTTing
1. In time display, press and hold “•”; hour will begin flashing.
2. Press “ ” to increase digits; press and hold “ ” for fast advance.
3. Press “ ” to advance to next setting value.
4. Setting sequence is: hour, minute, seconds, 12/24-hour format, year, month, and date.
5. Press “•” to exit setting mode.
NOTE: Weekday will automatically update upon exiting setting mode.
Time ZOne 2 SeTTing
1. In normal time display, press and hold “ ” to toggle to time zone 2.
2. Set time zone 2 by following time and calendar setting instructions above.
COunTDOWn TimeR
1. Press “•” to change to timer mode.
2. Press “ ” to start/stop the timer.
3. Press “ ” to reset timer to preset value, when the timer is stopped.
NOTE: “TMR” will flash in any other mode if the timer is left running/on.
NOTE: When timer reaches zero, alarm will sound twice.
TimeR SeTTing
1. In timer mode, press and hold “•”; minutes will begin flashing.
2. Press “ ” to increase digits; press and hold “ ” for fast advance.
3. Press “ ” to save and advance to seconds.
4. Press “ ” to increase digits; press and hold “ ” for fast advance.
5. Press “•” to exit setting mode.
ALARm mODe
1. Press “•” to change to alarm mode.
2. Press “ ” to toggle alarm on/off. Alarm on icon is ten dots in the middle of the display.
NOTE: Alarm will sound for 15 seconds; press any pusher to silence alarm.
NOTE: There are two alarms. Alarm 1 is set for Time Zone 1 only, and Alarm 2 is set for Time Zone 2 only.
However, both alarms can be set to “on” at the same time, no matter what the active time zone is. Each alarm
will sound at the preset time in its respective time zone.
ALARm SeTTing
1. In alarm mode, press and hold “•”; hour will begin flashing.
2. Press “ ” to increase digits; press and hold “ ” for fast advance.
3. Press “ ” to save and advance to minutes.
4. Press “ ” to increase digits; press and hold “ ” for fast advance.
5. Press “•” to exit setting mode.
ALARm 2 SeTTing
1. From normal time display, press and hold “ ” to toggle to time zone 2.
2. Press “•” to change to alarm mode.
3. Follow alarm setting instructions above.
CHROnOgRAPH mODe
1. Press “•” to change to chronograph mode.
2. Press “ ” to start/stop the chronograph.
3. When the chronograph is stopped, press “ ” to reset to zero.
NOTE: “CHRO” will flash in any other mode if the chronograph is left running/on.
SPLiT Time
1. Press “ ” while the chronograph is running. Split time will be displayed for 5 seconds, then automatically return
to chronograph mode.
2. Press “ ” to finalize timing.
ReSeTTing THe WATCH
If the time display is interrupted, resetting the watch is recommended. To reset all functions, press and hold all four
pushers at the same time for 3 seconds.