- 7 -
O-Ring module
Time DiSPLAy
There are 60 digital segments around the display. As each
minute goes by, black segments appear. The hour display will
appear in black segments until the minute segments build past
the number as they will then turn to a positive display.
Time SeTTing
Pushers are located on the case back.
1. Press and hold SET button for 2 seconds.
2. HOUR display will begin flashing. Press ADJUST button to change HOUR display.
3. Press SET to move to MINUTE.
4. Press ADJUST button to change MINUTE display.
5. Press SET to exit time setting function.
*Display will automatically return to time display if no buttons are pressed for 1 minute.
3:01
3:15
6:59
6:15
Digital Pendant and Ring module V.1
SWiTCHing OVeR THe mODe
The mode will be switched each time the button is pressed respectively as shown in the diagram below.
Pendant (back)
Ring
MODE
SET
MODE
SET
Time mode
Calendar mode
Second
MODE
SET
Press
MODE
Press
MODE
MONTH
DATE
Press
MODE
TOggLing 12 HOuR/24 HOuR
Press SET to toggle 12 hour or 24 hour format.
SeTTing Time/DATe
1. Press and hold SET for 2 seconds to enter setting mode, the YEAR flashes first for setting, press MODE to advance the value.
2. Press SET to change next setting item. The setting sequence is a cycle by Year, Month, Date, Hour and Minute.
3. During the setting mode, press MODE to advance the flashing digit.
NOTE: In setting mode, time will be updated to 24 hour format automatically.
12 hour format
Press SET to toggle
12 hour/24 hour format
MODE
SET
MODE
SET
24 hour format
