- 10 -
Plateau Digital
nORmAL Time DiSPLAy
1. Press “•” to toggle chime on/off. Chime on icon is the letter “C” in the center of the display.
2. Press “ ” to display time zone 2; press and hold “ ” to toggle time zones.
3. Press “ ” for EL.
4. Press “ ” to change mode; mode sequence is: normal time, alarm, chronograph, and countdown timer.
NOTE: In any setting, if no pusher is operated for 1 minute, all changes will be saved and the setting will
automatically return to Normal Time Display.
Time AnD CALenDAR SeTTing
1. In normal time display, press and hold “ ”; hour will begin flashing.
2. Press “ ” to increase digits.
3. Press “•” to save and advance to next setting value.
4. Repeat steps 2 and 3 through setting sequence. Setting sequence is: hour, seconds, 12/24-hour format, year, month, and date.
5. Press “ ” to save and exit setting mode.
NOTE: Weekday will automatically update upon exiting setting mode.
Time ZOne 2 SeTTing
1. In normal time display, press and hold “ ” to toggle to time zone 2.
2. Set time zone 2 by following steps 1-4 above.
ALARm mODe
1. Press “ ” to change to alarm mode.
2. Press “•” to toggle alarm on/off. Alarm on icon is a dot: “•” in the center of chime icon “C”.
NOTE: Alarm will sound for 20 seconds; press any pusher to silence alarm.
ALARm SeTTing
1. In alarm mode, press and hold “ ”; hour will begin flashing.
2. Press “ ” to increase digits.
3. Press “•” to set and advance to next setting value.
4. Repeat steps 2 and 3 through setting sequence. Setting sequence is hour, minute.
5. Press “ ” to save and exit setting mode.
NOTE: There are two alarms. Alarm 1 is for normal time display only, and Alarm 2 is for Time Zone 2 only. Alarm automatically updates
according to time zone selection. Each alarm needs to be set on/off individually.
CHROnOgRAPH mODe
NOTE: Chronograph shows minutes, seconds, and 1/100th seconds up to one hour. At one hour, chronograph display will change to hour,
minutes, seconds. The chronograph will count up to 23 hours, 59 minutes, 59 seconds.
1. Press “ ” to change to chronograph mode.
2. Press “•” to start/stop the chronograph.
NOTE: “CHRO” will flash in any other mode if the chronograph is left running/on.
3. When the chronograph is stopped, press “ ” to reset to zero.
SPLiT Time
1. Press “ ” while the chronograph is running. Split time will be displayed for 5 seconds, then automatically return to chronograph mode.
NOTE: “CHRO” will flash when in split mode.
2. Press “•” to finalize timing.
COunTDOWn TimeR
1. Press “ ” to change to timer mode.
2. Press “•” to start/stop the timer.
NOTE: “TMR” will flash in any other mode if the timer is left running/on.
3. Press “ ” to reset timer to previously set value.
NOTE: When timer reaches zero, beeps will sound 20 times. Press any key to silence alarm.
TimeR SeTTing
1. In timer mode, press and hold “ ”; minutes will begin flashing.
2. Press “ ” to increase digits.
3. Press “•” to save and advance to seconds.
4. Press “ ” to increase digits.
5. Press “ ” to save and exit setting mode.
NOTE: Maximum setting value for timer is 59 minutes, 59 seconds.
ReSeTTing THe WATCH
If the time display is interrupted, resetting the watch is recommended. To reset all functions, press and hold all four pushers at the same time
for 3 seconds. Watch will default to 12:00 a.m., January 1, 2009.