Problem
Probable Cause
Probable Solution
Water leaks out from the appliance
Power supply is cut off
Check the power supply and check the plug is well
connected
The door is open
Close the door
Wet surface
Wipe water off surface
Temperature variance (change function from
cooling to warming)
Normal situation, this is not a mal-function
The unit is not cooling or warming
Power supply is cut off
Check the power supply and check the plug is well
connected
The back vent is blocked
Keep 10cm clear space from sides
and back
Poor air circulation
Leave space among contents to help air circulation
The unit is in direct sunlight or near a hot
appliance
Move the appliance to a cool,dry place
“Warm/Cool” switch is in the “Off” position
Set the “Warm/Cool” switch to the “Warm” or “Cool”
position.
THERMOELECTRIC MINI FRIDGE COOLER INSTRUCTIONS
Technical Information
!
• CAUTION! RISK OF ELECTRIC SHOCK! Only connect one power supply option to the unit at any given time, either a
DC 12V power feed or an AC 110V power feed. AC/DC power feeds MUST not be used together, if you do, there is a risk
of damage to the product. Use only the adapter provided with the unit.
1. For DC power supply (DC 12V), connect the DC plug to DC jack and connect the car power socket cable to the car
lighter socket. Then, switch the “Warm Cool” switch to Warm or Cool position to select the warm or cool function.
!
• CAUTION: The “Warm/Cool” switch must be switched to the “OFF” position and the car power socket cable
unplugged when the car engine is turned off. Otherwise the car battery will be drained.
2. For AC power supply (110V), connect the output plug to the AC jack and connect the input plug to the power socket:
then, switch the “Warm/Cool” switch to Warm or Cool position to select the warm or cool function.
3. For cooling, set the “Warm/Cool” switch to the “Cool” position. The Green light indicates that the unit is cooling.
4. For warming, set the “Warm/Cool” switch to the “Warm” position. The Red light indicates that the unit is warming.
Cleaning and Maintenance
Before putting the appliance into operation, we recommend for reason of hygiene that it is washed inside and out with a
damp cloth.
Before any cleaning pull the plug of the connection cable out of the socket or of the cigarette lighter, otherwise there is a
risk of electric shock.
Use a damp cloth and mild soap solution to clean inside the appliance, use clean water to rinse of those parts cleaned with
soapy water.
Store the appliance and accessories in a dry, cool place.
DO NOT use any abrasive cleaning agents, if you do, there is a risk of damaging the appliance.
DO NOT immerse the appliance, power cord or plug in water.
DO NOT splash the appliance with water on the exterior or interior, as this may lead to rusting and deterioration of the
electrical insulation.
