THERMOELECTRIC MINI FRIDGE COOLER INSTRUCTIONS
after the unit is disconnected or turned off. However, the inside temperature will rise to that of the surrounding air over
time. Exercise normal caution that you would for any food/drink in a cooling device. DO NOT eat or drink perishable
items that may have become spoiled due to in proper temperature control. Note: This appliance cannot provided proper
temperature control. This appliance is not designed for storing open containers or liquids.
DO NOT put ice or ice packs in the appliance.
Using the appliance as a warmer:-
It is recommended that items placed in the unit be pre-heated to assist the warmer in reaching the maximum temperature
as quickly as possible. Unit will continue to operate as long as power is supplied and contents will stay warm for some time
after unit is disconnected or turned off. However, the inside temperature will match to that of the surrounding air over time.
Exercise normal caution that you would for any food in a warming device.
DO NOT eat or drink perishable items that may have become spoiled due to in proper temperature control. Note: This
appliance cannot provided proper temperature control. This appliance is not designed for storing open containers or
liquids.
!
CAUTION The Warmer is intended to maintain the temperature of pre-heated food only, it is not designed to heat up
cold items or for storing open containers or liquids.
Tips for the best cooling/heating:-
Select a well ventilated location which is protected from the sunshine and only place pre-cooled or pre-warm contents into
the unit. Take care not to open the unit longer than necessary, as this will affect the performance of the appliance.
Ensure that the unit is not packed too full and that air can circulate properly between the contents of the unit.
Using the appliance in a vehicle:-
When travelling by car, do no transport the appliance in the passenger compartment.
DO NOT start vehicle with appliance plugged into socket. The resulting voltage surge could damage the unit. Unplug the
unit before starting vehicle, then re-plug appliance in after vehicle is running.
When operating with a DC 12V supply always ensure that the DC 12V plug is located firmly and safely in the connection
socket of the cigarette lighter and that the connection socket is free of dirt. If the contact between plug and socket is
inadequate, vibration from the car can cause the power supply to switch on and off in short bursts, this can results in
overheating.
When operating the with a DC 12V supply be careful not to switch the car engine on and off frequently, so that the power
supply to the appliance is not interrupted constantly . Also be aware that the car battery can be drained if the car engine is
switched off but you continue to use the appliance.
If you use the appliance in a car, when the car is not running, please be aware that water may leak from the appliance.
This may also happen when the function is changed from cooling to warming and vice versa, this is not a malfunction.
General Safety Instructions
ONLY use this appliance in accordance with this instruction manual, please read these instructions carefully and keep for
future reference, the manufacturer has no liability for damage which is caused by improper use or incorrect operation.
Check the voltage indicated on the rating plate. This appliance is designed for AC 110V or DC 12V electric supply.
Suitable for indoor use only, or use in a vehicle.
Place the appliance on a flat surface and make sure it is not in direct sunlight.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capacities,
