D-F0399 NP-266S/366S Specifications Ver.0.01 Provisional
6
2.3 Power supply specifications
1)
Power supply input connector (II type)
Optional
AC adapter will be used for this printer
(
Power to be supplied from outside
)
Connector on printer side
:
TCS7960-532010 Hosiden or equivalent
Connector on Adapter side
:
TCP8927-631100 Hosiden or equivalent
2) Electrical condition
Operating Voltage
: DC24V±5%, DC5V±5% (Type I)
:
DC24V±5%
(Type
II)
Current Consumption
※
1,
※
2
Standby
: Average approx. 0.1 A
Printing
:
Power supply
Printing average of 25%
Printing average of 100 %
NP-266S I
24V
Max. approx. 1.91 A
Max. approx. 7.64 A
5V
Max. approx. 0.16 A
Max. approx. 0.17 A
NP-266S II
24V
Max. approx. 1.89 A
Max. approx. 7.56 A
NP-366S I
24V
Max. approx. 2.73 A
Max. approx. 10.92 A
5V
Max. approx. 0.16 A
Max. approx. 0.17 A
NP-366S II
24V
Max. approx. 2.75 A
Max. approx. 11.00 A
* Paper Feed only : Average approx. 0.50 A
※
1
Please use a higher capacity AC adaptor for more than such printing or for the other power supply
prepared by your side.
※
2
If power supply cable is excessively long, the operation may become unstable. Cable should be made
as short as possible. If not available, connect cables near the printer and place an electrolysis
condenser of 2200µ between power supply and ground. Voltage resistance should be higher than 35V.
* For preventing from static electric discharge, make sure to connect FG wire.
No Function
1 +24V
2 GND
3 N.C
Shell FG
Connector drawing
3
1
2