manualshive.com logo in svg

Star Micronics LC24-15II, Руководство пользователя


Поделиться
Скачать
background image

27

C

hapter 4

CONTROL PANEL OPERATIONS

The control panel buttons can be pressed individually to perform the operations
indicated by their names. Other functions can be achieved by pressing the
control panel buttons in combination, or by holding these buttons down when
you turn the printer’s power on.

This chapter explains all the button and indicator functions.
• Pause printing
• Feed paper (fast and slow, forward and reverse)
• Park fanfold forms
• Set the top-of-form position
• Select the print pitch
• Select a font
• Save macro definition
• Clear the printer’s buffer
• Print test patterns
• Prevent software from changing the panel pitch and font selections
• Adjust the print alignment for bi-directional printing
• Print a hexadecimal dump

BUTTON AND INDICATOR FUNCTIONS

The printer is equipped with five buttons on the control panel. From left to
right they are   FONT  ,  PITCH  ,  SET/EJECT  ,   PAPER FEED  and
ON LINE  .
The following is a brief guide to the buttons and indicators on the control
panel.

Figure 4-1.

 Control panel.

Содержание LC24-15II




























































































































































Отзывы:

Нет отзывов

Похожие инструкции для LC24-15II

Бренды по названию

Популярные бренды

Загрузить еще бренды