IFBD-HW03/04 Product Specifications Rev. 0.00
3.4.2.2. TRAP Occurrence Phenomenon
When the EnableAuthenTrap setting on this product is set to ENABLE (which can be set from the
Web or Telnet), the following three types of phenomenon occur for the product to issue a TRAP to the
SNMP manager (Trap notification address).
TRAP Occurrence Phenomenon
1. When the product is started
[Generic trap type = 0 (Cold Start)]
2. When the printer status has changed (IEEE1284 port status monitoring)
[Generic trap type = 6 (Enterprise Specific)]
3. When there was access using an illegally authenticated community name
[Generic trap type = 4 (Authentication Failure)]
3-31
