IFBD-HW03/04 Product Specifications Rev. 0.00
Continuation 4 of Support MIB
Name
Explanation
snmpInPkts
Total number of SNMP messages received from transport service
snmpOutPkts
Total number of SNMP messages sending send requests to transport layer
snmpInBadVersions
Total number of unsupported version messages of received SNMP messages
snmpInBadCommunityNames
Total number of illegal community name messages of received SNMP messages
snmpInBadCommunityUses
Total number of operations not allowed in that community of received SNMP
messages
snmpInASNParseErrs
Number of errors detected in ASN.1 or BER format while decoding the SNMP
messages received
snmpInTooBigs
Number of received SNMP PDU whose error status was “Too Big”
snmpInNoSuchNames
Number of received SNMP PDU whose error status was “No Such Name”
snmpInBadValues
Number of received SNMP PDU whose error status was “Bad Value”
snmpInReadOnlys
Number of received SNMP PDU whose error status was “Read Only”
snmpInGenErrs
Number of received SNMP PDU whose error status was “Gen Err”
snmpInTotalReqVars
Number of MIB objects normally read by Get-Request, Get-NextRequest PDU
snmpInTotalSetVars
Number of MIB objects normally changed by receiving Set-Request
snmpInGetRequests
Number of SNMP Get-Request PDU received
snmpInGetNexts
Number of SNMP Get-NextRequest PDU received
snmpInSetRequests
Number of SNMP Set-Request PDU received
snmpInGetResponses
Number of SNMP Get-Response PDU received
snmpInTraps
Number of SNMP TRAP PDU received
snmpOutTooBigs
Number of PDU sent by specifying “Too Big” in the error status
snmpOutNoSuchNames
Number of PDU sent by specifying “No Such Name” in the error status
snmpOutBadValues
Number of PDU sent by specifying “Bad Value” in the error status
snmpOutGenErrs
Number of PDU sent by specifying “Gen Err” in the error status
snmpOutGetRequests
Number of SNMP Get-Request PDU sent
snmpOutGetNexts
Number of SNMP Get-NextRequest PDU sent
snmpOutSetRequests
Number of SNMP Set-Request PDU sent
snmpOutGetResponses
Number of SNMP Get-Response PDU sent
snmpOutTraps
Number of SNMP TRAP PDU sent
snmpEnableAuthenTraps
Authentication-failure TRAP occurrence control
(1: TRAP occurs; 2: TRAP does not occur)
Continued on next page
3-28
