Star Lake INS8346B, Руководство пользователя

Страница: 59 / 93

Console Redirection Settings
The setting specify how the host computer and the remote computer (which the user is using) will exchange
data. Both computers should have the same or compatible settings.
Out-of-Band Mgmt Port: Microsoft Windows Emergency Management Service allows for remote
management of a Windows Server OS through a serial port. The options are COM0 (Disabled),
COM1(Pci Bus0, Dev0, Func0) (Disabled)
Terminal Type: VT-UTF8 is the preferred terminal type for out-of-band management. The next best
choice is VT100+ and then VT100. See above, in Console Redirection Settings page, for more Help with
Terminal Type/Emulation. The options are VT100, VT100+, VT-UTF8, ANSI.
Bits per second: selects serial port transmission speed. The speed must be matched on the other side.
Long or noisy lines may require lower speeds. The options are 9600, 19200, 57600, 115200.
Flow Control: Flow control can prevent data loss from buffer overflow. When sending data, if the
receiving buffers are full, a “stop” signal can be sent to stop the data flow. Once the buffers are empty,
a “star” signal can be sent to re-start the flow. Hardware flow control uses two wires to send
start/stop signals. The options are None, Hardware RTS/CTS, Software Xon/xoff
Data bits: 8
Parity: None
Stop bits: 1
58