PEG Sampler Calibrate
Enable or disable PEG Sampler Calibrate.
Auto means Disabled for SNB MB/DT, Enabled for IVB A0 B0.
Swing Control
Perform PEG Swing Control, on IVB C0 and Later.
Gen3 Equalization
Perform PEG Gen3 Equalization steps.
Gen3 Eq Phase 2: Perform PEG Gen3 Equalization phase 2.
PEG Gen3 Root Port Present Value for each Lane: Root Port Present Value Per lane for Gen3 Equalization.
Lane 0~15: Value for Lane 0~15
PEG Gen3 Endpoint Present Value each lane: Endpoint Present Value Per lane for Gen3 Equalization.
Lane 0~15: Value for Lane 0~15.
PEG Gen3 Endpoint Hint Value each Lane: Endpoint Hint Value Per lane for Gen3 Equalization.
L
ane 0~15: Value for Lane 0~15.
Gen3 Eq Present Search
Perform PEG Gen3 Preset Search algorithm, on IVB C0 and Later.
PEG Link Disabled
Enable or disable PCIe link disable mechanism for additional power saving.
Fast PEG Init
Enable or disable Fast PEG Init. Some optimization if no PEG devices present in cold boot.
RxCEM Loop back
Enable or disable RxCEM Loop back.
PCIe Gen3 RxCTLEp Setting
The range of the setting for perbundle is (0~15) This setting has to be specified basing on platform design
and following the guideline.
PCIe Gen3 RxCTLEp Setting 0: The Range of the setting is (0~15) This setting has to be specified basing
on platform design and following the guideline.
PCIe Gen3 RxCTLEp Setting 1: The Range of the setting is (0~15) This setting has to be specified basing
on platform design and following the guideline.
PCIe Gen3 RxCTLEp Setting 2: The Range of the setting is (0~15) This setting has to be specified basing
on platform design and following the guideline.
83
Содержание INS8346B
