8
The safety tag (p/n
15875) at right is attached
to the tool when shipped
from the factory. Read
and understand the safety
instructions listed on this
tag before removal. We
suggest you retain this tag
and attach it to the tool
when not in use.
TOOL STICKERS & TAGS
(shown smaller then actual size)
SAFETY TAG P/N 15875
I M P O R T A N T
READ OPERATION MANUAL AND
SAFETY INSTRUCTIONS FOR THIS
TOOL BEFORE USING IT.
USE ONLY PARTS AND REPAIR
PROCEDURES APPROVED BY
STANLEY AND DESCRIBED IN THE
OPERATION MANUAL.
TAG TO BE REMOVED ONLY BY
TOOL OPERATOR.
1. FAILURE TO USE HYDRAULIC HOSE
LABELED
AND CERTIFIED AS NON-CONDUCTIVE
WHEN
USING HYDRAULIC TOOLS ON OR NEAR
ELECTRICAL LINES MAY RESULT IN DEATH
OR SERIOUS INJURY.
BEFORE USING HOSE
LABELED AND CERTI-
FIED AS NON-CONDUCTIVE
ON OR NEAR
ELECTRIC LINES BE SURE THE HOSE IS
MAINTAINED AS NON-CONDUCTIVE
. THE
HOSE SHOULD BE REGULARLY TESTED FOR
ELECTRIC CURRENT LEAKAGE IN ACCOR-
DANCE WITH YOUR SAFETY DEPARTMENT
INSTRUCTIONS.
2. A HYDRAULIC LEAK OR BURST MAY CAUSE
OIL INJECTION
I N T O T H E
BODY OR CAUSE OTHER SEVERE PERSONAL
INJURY.
A
DO NOT
EXCEED SPECIFIED FLOW AND
PRESSURE FOR
I M P O R T A N T
READ OPERATION MANUAL AND
SAFETY INSTRUCTIONS FOR THIS
TOOL BEFORE USING IT.
USE ONLY PARTS AND REPAIR
PROCEDURES APPROVED BY
STANLEY AND DESCRIBED IN THE
OPERATION MANUAL.
TAG TO BE REMOVED ONLY BY
TOOL OPERATOR.
D DO NOT LIFT OR CARRY TOOL BY THE
HOSES. DO NOT ABUSE HOSE. DO NOT
USE KINKED, TORN OR DAMAGED HOSE.
3. MAKE SURE HYDRAULIC HOSES ARE PROP-
ERLY CONNECTED TO THE TOOL BEFORE
PRESSURING SYSTEM. SYSTEM PRESSURE
HOSE MUST ALWAYS BE CONNECTED TO TOOL
“IN” PORT. SYSTEM RETURN HOSE MUST
ALWAYS BE CONNECTED TO TOOL “OUT” PORT.
REVERSING CONNECTIONS MAY CAUSE RE-
VERSE TOOL OPERATION WHICH CAN RESULT
IN SEVERE PERSONAL INJURY.
4. DO NOT CONNECT OPEN-CENTER TOOLS TO
CLOSED-CENTER HYDRAULIC SYSTEMS. THIS
MAY RESULT IN LOSS OF OTHER HYDRAULIC
FUNCTIONS POWERED BY THE SAME SYSTEM
AND/OR SEVERE PERSONAL INJURY.
5. BYSTANDERS MAY BE INJURED IN YOUR WORK
AREA. KEEP BYSTANDERS CLEAR OF YOUR
WORK AREA.
D A N G E R
D A N G E R
Stanley Hydraulic tools
Division of the Stanley Works
3810 SE Naef Road
Milwaukie, OR 97267
05152
Stanley Logo Decal
03786
GPM Decal
28322
CE Decal (CE Only)
28788
Manual Decal
(CE Only)
D
30 LPM @ 138 B AR
EHTMA CATEGORY
11207
Circuit Type D Decal
(CE Only)
1.300
28786
Coupler Decal
Содержание tp03
Страница 2: ......
