*
TECHNICAL INFORMATION
Specifications
Inflator
SXCM27550323
Voltage
240V AC ~ 50Hz
Motor
Electric 2.75 HP
Wattage
2100W
No Load Speed
2800 RPM
Free Air Delivery (FAD)
200L per minute
Tank Size
50L
Duty Cycle
75%
Max. Tank Pressure
145PSI (10 Bar)
Outlet Pressure
1PSI - 145 PSI Adjustable
Minimum Generator Size
Pure Sine Wave 5000W
Noise Rating
62dB@5m
Motor/Pump
Kicks in 115PSI
Pressure Cycle
Stops 145PSI
Number of Outlets
2
For any queries or assistance call
Customer Service
AUST. 1300 660 457
NZ 0800 474 876
Hours of operation:
Monday to Friday 8.00am - 5.00pm AEST
Do not return to place of purchase.
Keep your purchase receipt, this will be required to
make any claims under the 24 month warranty.
STANLEY®, The STANLEY Logo, The Notched Rectangle and the Yellow and Black Diagonal Package
Design are all trademarks of the Stanley Black & Decker, Inc or an affiliate thereof and are used under
license. Product manufactured and distributed by Smart Marketing Group Pty Ltd.
Manufactured in China.
MAINTENANCE
Daily: Before use
1. Seal the tank drain tap,see page 15, Pic. 12.
2. Check safety valve operation,see page 14, Pic. 10.
After Use
1. Open the tank drain tap,see page 15, Pic. 12
and leave open to allow to drain.
2. Wipe down the compressor.
3. Store safely and securely.
If your compressor does not start
• Check that you have plugged the power lead into a
standard 240V 10Amp power point and turned the
switch ON.
• Check that you have turned the air compressor ON/OFF
switch ON.
• The air tank may be full. Use your air tool and the air
compressor should start when the pressure decreases
to 115PSI.
If these tips do not work please have your unit checked by
an authorised service centre.
TROUBLE SHOOTING
