background image

2

3

INTRODUCTION

Dear Customer,
Thank you for purchasing this compressor which has 
passed through our extensive quality assurance processes. 
Every care has been taken to ensure that it reaches you 
in perfect condition. However, in the unlikely event that 
you should experience a problem, or if you require any 
assistance, please do not hesitate to contact us;

If you have a problem, call customer service do not 
return this compressor to the place of purchase.

CUSTOMER SERVICE

Australia: 1300 660 457
New Zealand: 0800 474 876
Operating times: Monday – Friday  

8.00am - 5.00 pm 

Australian Eastern Standard Time (AEST)

EXPRESS WARRANTY  
STATEMENT - COMPRESSOR

You are not required to do anything to register your 
compressor purchase.  Please attach the purchase receipt 
to this manual and ensure both are kept safe.  We hope you 
enjoy your new compressor, and if you have any problems 
call customer service on the above phone numbers.  Do not 
return to place of purchase.
Smart Marketing Group Pty Ltd (SMG) warrants  
that this compressor will be free from manufacturing faults 
or defects for 24 months from the date of  
purchase, providing original purchase receipt is kept  
and shown when needed and is subject to the terms  
and conditions below.
If a warranty fault appears within the warranty period, 
SMG reserves the right to replace or repair the product. 
In the event that SMG chooses to replace the product,  
this original warranty will expire at the original date.   
If the product includes various accessories or components, 
only the defective accessory or component will be replaced 
or repaired.
SMG reserves the right to replace defective parts of the 
product with parts and components of similar quality, 
grade and composition where an identical part or 
component is not available.
Products presented for repair may be replaced by 
refurbished products of the same type rather than  
being repaired.  Refurbished parts may be used to  
repair the products.

What is covered.

• Manufacturing fault or defect.

How to claim under this warranty.

• Call customer service.
• Ensure you have the following: Original purchase 

receipt, Model of compressor, Serial number of 

compressor.

• Discuss the issue.
• Customer service will advise which authorised service 

agent to take the compressor to provided the issue is a 

warranty one.

• Take compressor to authorised service agent for repair.

What is not covered.

• Commercial use of compressor.
• Use of compressor for hire
• Use of compressor in a commercial premises.
• Damage or deterioration due to transport.
• Damage caused by negligence, misuse, abuse or 

accident or incorrect voltage and wattage.

• Any corrosion or rusting.
• Damage caused by incorrect set up and start up.
• Replacement parts due to general wear and tear.
• Compressors with serial number defacement, 

modification or removal.

• Compressors which have been serviced by other than  

an authorised SMG service agent.

• Compressors with no original purchase receipt.
• Compressors which have been on sold,  

not original purchaser.

• Damage due non-servicing of compressor as is  

required by this manual.

• Blockages / damage caused by dust, dirt, spiders  

webs or insects.

• Damage caused by the incorrect fitting of accessories.
• Damage caused by overloading, overworking  

the compressor.

• Damage to attached equipment or third  

party accessories.

• Damage caused by attached equipment or  

third party accessories.

CONTACT DETAILS

Smart Marketing Group Pty Ltd
33-35 Lionel Road, Mt. Waverley
Victoria 3149, Australia.
Tel (+613) 9543 7266
Fax (+613) 9543 9839
[email protected]

Содержание SXCM27550323

















Отзывы: