28 • ENGLISH
BOWED MATERIAL
The When cutting bowed material always position it as
shown in Fig. K and never like that shown in Fig. L.
Positioning the material incorrectly will cause it to pinch
the blade near the completion of the cut.
CUTTING PLASTIC PIPE AND OTHER ROUND
CROSS-SECTIONAL MATERIAL
Plastic pipe can be easily cut with your saw. It should be
cut just like wood and clamped or held firmly to the fence
to keep it from rolling particularly when making angle cuts.
MAINTENANCE
Perform all maintenance with miter saw
unplugged.
1. All bearings are sealed. They are lubricated for life
and need no further maintenance.
2. Periodically clean all dust and wood chips from
around and under the base and the rotary table. Even
though slots are provided to allow debris to pass
through, some dust will accumulate.
3. The brushes are designed to give you several years of
use. If they ever need replacement follow the
instructions in this manual or return the tool to the
nearest service center for repair.
Important!
To ensure product SAFETY and
RELIABILITY, repairs, maintenance, and adjustments
should be performed only by Authorized Service
Technicians, as they use identifical replacement pieces.
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning
¡Warning!
Before performing any maintenance, switch
off and unplug the tool.
f
Regularly clean the ventilation slots in your tool using
a soft brush or dry cloth.
f
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
ACCESSORIES
The performance of your tool depends on the accessory
used. STANLEY accessories are engineered to
high quality standards and designed to enhance the
performance of your tool. By using these accessories you
will get the very best from your tool.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your STANLEY
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
STANLEY offers a full network of company-owned and
authorized service locations. All STANLEY Service
Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
For more information about our authorized service
centers and if you need technical advice, repair, or
genuine factory replacement parts, contact the STANLEY
location nearest you.
SPECIFICATIONS
STSM1525
Power
1500 W
No-load speed
5500/min (rpm)
Wheel capacity
10” (254 mm)
Miter cut
47º left and right
Bevel cut
45º left
Compound cut
Yes
Maximum depth cut
8-3/4” (70 mm)
