SRA User
Manual ◄ 15
TRANSPORT
Transporting and Loading
Transporting over short distance
The machine must only be transported or loaded
with the motor off.
Make sure that the machine does not endanger
people by tilting or sliding.
Tie the machine down so that it is secured against
rolling, sliding or tipping over.
When lifting the machine, hang the lifting device
only in the cross member provided.
The machine should not swing during suspension.
Do not stand under suspended loads.
Use only safe, sufficiently strong lifting devices.
General Instructions
• Do not lay the tamper on the carburettor side.
Danger
• Over short distances, transport the tamper lying on the
castors, with the motor shut off.
Loading
• To load the tamper, hang the slinging equipment in the
cross member (1).
Tying the machine down
• After loading the tamper on the vehicle, tie it down
through the guide bar and handle.
