14 ► SRA
User Manual
Operation
Important
Danger
OPERATION
Guide the machine only with the guide bar, and
don't lift it during operation.
Always keep an eye on the machine when its
motor is running.
• The operator's position is in the forward direction behind
the machine.
• Set the throttle (5) to «MAX»; the machine works at its
highest frequency.
If the motor oil is too low, the motor won't start.
The dumping height of the material to be com
pressed should not be higher than the vibrating
tamper can drive over.
• To get uniform operating performance, throttle lever
should be at max position.
Rate of Advance
• The rate of advance can be influenced in two ways:
- By changing the tilt:
Forward tilt = forward quickly
Rearward tilt = forward slowly
- By putting weight on the guide bar:
No weight = forward slowly
Heavy weight = forward quickly
