Stanley FME440, Оригинальное руководство пользователя, Страница: 8 / 20

8
ENGLISH
(Original instructions)
Lock on (Fig. C)

To lock the tool on, depress the paddle (1) with one hand
and push the slider (2) right to the locked position with
your other hand as shown in Figure C.

To stop the tool, push the slider left to the unlocked
position and release paddle.
Lock off (Fig. D)

To lock the tool OFF, make sure the paddle (1) is not
depressed and push the slider (2) right to the locked
position. The paddle cannot be depressed while switch is
in locked position.

To unlock the paddle, push the slider left to the unlocked
position. The paddle can now be depressed.
Dust Collection
Warning! Collected sanding dust from sanding surface
coatings (polyurethane, linseed oil, etc.) can sel fi gnite in
sander dust bag or elsewhere and cause fi re. To reduce risk,
empty bag frequently and strictly follow sander manual and
coating manufacturer’s instructions.

To attach the canister to the sander, line up the grooves
(8) in the canister (6) with the nubs (9) on the dust port (5).
Ensure the longer side (10) of the canister opening is on
the top side of the port.

Slide the canister onto the dust port and turn the canister
clockwise to lock it in place as shown in Figure F.

To remove, turn the canister counterclockwise and slide
the canister off.

To empty the canister, remove it from the dust port
and dump the sanding debris into an appropriate trash
receptacle.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance, switch off and
unplug the tool.

Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.

Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fi tted:

Safely dispose of the old plug.

Connect the brown lead to the live terminal in the new
plug.

Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fi tting instructions supplied with good quality plugs.
Recommended fuse: 5 A
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you fi nd one day that your Stanley Fat Max product
needs replacement, or if it is of no further use to you, do
not dispose of it with household waste. Make this product
available for separate collection.
z
Separate collection of used products and packag-
ing allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Stanley Europe provides a facility for the collection and
recycling of Stanley Fat Max products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Stanley Europe of
fi ce at
the address indicated in this manual. Alternatively, a list of
authorised Stanley Europe repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com