Stanley Fatmax TLM165S, Руководство пользователя

Страница: 20 / 338

20
GB Clearing the Tool's Memory
You can clear one or more measurements that are
currently in the tool's memory.
Clearing a Measurement
1.
If is not already displayed as the current
function (Figure
E 5
), click the current function
icon and then select from the list of functions
(Figure
G 3
).
2.
Click or to scroll through the
measurements that have been stored in the
tool's memory (up to 20) until you display the
measurement to be deleted.
3.
Click .
4.
Click to delete the measurement.
Clearing All Memory
1. If is not already displayed as the current
function (Figure
E 5
), click the current function
icon and then select from the list of functions.
2.
Click .
3.
Click to delete ALL measurements from the
tool's memory.
Turning Off the Tool
The tool can be turned off in either of these ways:
• Press and hold for 10 seconds. When you
release after 10 seconds, the tool will turn off.
• If you do not use the tool for the number of seconds
(30, 60, or 300) you have set for auto turn off, it will
automatically turn off.
Calibrating the tool
Please note that if you do not position the tool correctly
for each step of the calibration process, will appear
in red on the screen.
1. On the touchscreen, click (Figure
C 8
).
2.
On the Settings Menu (Figure
H
), click .
3.
Place the tool with the front screen facing upward
on a flat, level surface (Figure
W
1
).
4. Press .
5.
While the tool is still laying on the level surface,
turn the tool 180° (Figure
W
2
).
6.
Press .
7.
Flip the long side of the tool 90° so it is laying on
its side (Figure
W
3
).
8.
Press .
9. While the tool is still laying on its side, turn the
tool 180° (Figure
W 4
).
10.
Press .
11.
Make sure appears on the tool's screen
(Figure
W
5
).
12.
Click to return to the previous screen.
Warranty
STANLEY warrants this product for a period of Two (2)
years against deficiencies in material and workmanship.
This LIMITED WARRANTY does not cover products
that are improperly used, abused, altered, or repaired.
Please go to www.2helpU.com for more information or
return instructions. Unless otherwise noted, STANLEY
will repair without cost, any STANLEY product found
to be defective, including parts and labor charges, or
at STANLEY’s option, will replace such tools or refund
the purchase price, less the amount for depreciation,
in exchange for the defective tool. THIS LIMITED
WARRANTY EXCLUDES ALL INCIDENTAL OR
CONSEQUENTIAL DAMAGES. Some states do
not allow the exclusion or limitation of incidental or
consequential damages, so these limitations may not
apply to you. This TWO YEAR LIMITED WARRANTY
gives you specific legal rights that may vary from state
to state. In addition to the warranty, STANLEY Lasers
are covered by: 30-Day Money Back Guarantee. If you
are not completely satisfied with the performance of
your STANLEY Laser for any reason, you can return it
within 30 days from the date of purchase with a receipt
for a full refund.