Pubn No: 30000H0K
SAFETY NOTICES
WARNING:
1) THIS INSTRUMENT IS USED TO TEST MATERIALS THAT MAY BE HAZARDOUS WITH
REGARD TO FLAMMABILITY, COMBUSTIBILITY, VOLATILITY, TOXICITY OR THE
GENERATION OF SMOKE AND VAPOURS.
2) IT IS THE USER’S RESPONSIBILITY TO ENSURE THAT ALL RELEVANT REQUIREMENTS OF
LOCAL AND NATIONAL HEALTH AND SAFETY LEGISLATION ARE COMPLIED WITH
DURING INSTALLATION AND OPERATION OF THIS INSTRUMENT, AND THE STORAGE,
PREPARATION AND DISPOSAL OF SAMPLE.
3) PARTS OF THIS INSTRUMENT REACH TEMPERATURES EXCEEDING 300°C.
4) READ THIS MANUAL BEFORE INSTALLING OR OPERATING THE INSTRUMENT.
5) THIS INSTRUMENT SHOULD ONLY BE INSTALLED AND OPERATED BY TRAINED STAFF,
WHO ARE FAMILIAR WITH THE RELEVANT LABORATORY AND ENGINEERING PRACTICES.
6) THIS INSTRUMENT MUST NOT BE LEFT UNATTENDED WHEN IN USE.
7) ALWAYS WEAR SAFETY GLASSES AND PROTECTIVE CLOTHING WHEN INSTALLING OR
OPERATING THIS INSTRUMENT.
© 2007 by Stanhope-Seta, all rights reserved.
The copyright in this work is vested in Stanhope-Seta. Reproduction in whole or part is strictly prohibited, except with the written
consent of Stanhope-Seta, and then only on the condition that this notice is included in any such reproduction.
The information contained in this publication is believed to be accurate and correct at the time of printing. However Stanhope-Seta
cannot accept responsibility for any omissions or errors. If the user of this publication has any comment, query or suggestion, please
contact Stanhope-Seta Ltd.
Due to the company’s policy of improving products, the instrument supplied may differ slightly from that detailed within this document.
Stanhope-Seta Ltd reserve the right to change or alter the specifications, operating procedures etc detailed within this document.
SETA
and the
logo are registered trademarks of Stanhope-Seta Ltd.
Issue K
10 Jun 2007
2
