MS350 - Manual
AM150B
6
Standby AB – standbygroup.se
Pos 3 Stand-alone functions Denmark
Connector P1
Pin Function
Standby
Name
Imax
Recommended fuse
1
Beacon left
Y11+
6A
2
Beacon right
Y12+
6A
3
Power supply for outputs
(Y11+, Y12+, Y15+, Y16+, Y17+, Y18+)
S13+
< 20A
Common fuse max
15A(see connection
section)
4
Power supply for outputs
(Y11+, Y12+, Y15+, Y16+, Y17+, Y18+)
S14+
< 20A
5
Status ok loudspeaker
Y15+
2A
6
Status ok beacon left
Y16+
2A
7
Status ok beacon right
Y17+
2A
8
Not used
Y18+
2A
9
- Loudspeaker left
SP19-
5A
10
+ Loudspeaker left
SP110+
5A
11
+ Loudspeaker right
SP111+
5A
12
- Loudspeaker right
SP112-
5A
13
Manually change sound
(horn-signal, edge trigged)
When only blue light is ON sound Hi/Lo clean SE will be played
for 2 cycles.
When activating more than one sound at the same time this input
is used to change to next sound manually.
X113+
< 20 mA max 1A
14
Ground MS-350
S114-
10A
15
Manually change sound
(horn-signal, edge trigged)
When only blue light is ON sound Hi/Lo clean SE will be played
for 2 cycles.
When activating more than one sound at the same time this input
is used to change to next sound manually.
X115-
< 20 mA max 1A
16
Power Supply Amplifier
S116+
10A
10A
17
Hi/Lo clean SE
(continuous feed)
Activates the sound AND the output Beacon. This input has
higher priority than X119 and X121 if activated at the same time.
X117+
< 20 mA max 1A
18
Beacon
(continuous feed).
X118+
< 20 mA max 1A
19
Yelp SE
(continuous feed)
Activates the sound AND the output Beacon. This input has
higher priority than X121 if activated at the same time.
X119+
< 20 mA max 1A
20
Automatically change sound
(continuous feed)
When activating more than one sound at the same time this input
activates automatically sound change. The sounds will be played
in a loop. Each sound will be played for a minimum of 6 seconds
(the currently played cycle must be completed). Input +/- X113
can be used to force to next sound before the time has ended.
X120+
< 20 mA max 1A
21
Wail US
(continuous feed)
Activates the sound AND the output Beacon.
X121+
< 20 mA max 1A
22
Air Horn
(continuous feed)
This sound has higher priority than all other sounds.
X122+
< 20 mA max 1A
