02
• Any work on the pump should always be performed by at least two workers.
• Clothing of the personnel to work on the pump should always be suitable for the works they
will
perform and/or the personnel should use necessary safety equipment.
• The user personnel should take necessary warning precautions (e.g. warning signs, barricades,
etc.).
• When the pump and pipes connected to the pump are under pressure, do not perform any work on
the pump definitely.
• Once the work on the pump is over, put in place all safety shields previously removed.
• Never operate the pump in reverse direction.
• Never insert pour hands and fingers into any hole or openings of the pump.
• Do not trace on the pump and/or pipes connected to the pump.
1.3.1 CE signs and approvals
It is a legal requirement that machinery and equipment put into service within certain regions of the
world shall conform with the applicable CE Marking Directives covering Machinery and, where
applicable, Low Voltage Equipment, Electromagnetic Compatibility (EMC), Pressure Equipment
Directive (PED).
Where applicable, the Directives and any additional Approvals, cover important safety aspects
relating to machinery and equipment and the satisfactory provision of technical documents and
safety instructions. Where applicable this document incorporates information relevant to these
Directives and Approvals. To confirm the Approvals applying and if the product is CE marked, check
the serial number plate markings and the Certification, see the last page of this document.
1.3.2 Personnel qualification and training
All personnel involved in the operation, installation, inspection and maintenance of the unit must
be qualified to carry out the work involved. If the personnel in question do not already possess the
necessary knowledge and skill, appropriate training and instruction must be provided. If required
the operator may commission the manufacturer / supplier to provide applicable training.
Always co-ordinate repair activity with operations and health and safety personnel, and follow all
plant safety requirements and applicable safety and health laws and regulations.
1.4
Recycling
For products and arts which will not be used and scraped, use the local or private waste collection
services. If it is not possible, consult the nearest authorized service centre of STANDART POMPA.
Always disconnect power connection with the engine before you perform any work on the
pump and make sure that no connection is made accidentally.
