01
General Risk
Signifies safety precautions which if not applied may cause vital.
Electrical Risk
Warnings about the electrical current
Warning
Safety instructions that if not applied may cause damage to the machine or operation.
This manual should be made available at a safety place easily accessible by personnel
responsible for safe operation and maintenance of the pump the qualified
1. GENERAL
The objective of this manual is to:
• Instruct the users on installation, dismounting, maintenance and repair of the pump, and
• Describe methods of start-up, operation and stop of the pump.
1.1 Safety Signs
1.2 General Instructions
• The authorized personnel should be experienced and well - informed about the related standards.
• The instructions given in this manual should be carefully read and applied at any phase of the
installation and operating process of the pump.
• The user is responsible to ensure that the inspection and installation are performed by the
authorized and qualified personnel, who read this manual thoroughly.
• The pump should never be operated beyond the operating conditions set forth in the purchase
order. The reason is that the operating conditions set forth in the purchase order have been taken
into consideration in the selection of the pump material and trial of the pump.
• If the pump is required to be operated apart from the conditions set forth in the purchase order,
please contact with
STANDART POMPA
. Standart Pompa does not assume any responsibility for
any damages that may arise from operation of the pump beyond the specified conditions without
written consent.
• If the pump will not be installed at its place immediately after delivery, it should be stored at a
clean and dry place where the ambient temperature does not change excessively. If the proper pre
cautions are not taken, excessively low or high temperatures may cause serious damages to the
pump.
•
Standart Pompa
does not accept any responsibility under warranty for any repair or replacement
performed by the user or any other unauthorized persons.
• This manual does not include safety rules applicable at the place of use.
1.3 Safety Instructions
• Operate the pump only under the specified pump.
• Any tension, contraction and strain on the piping system should never transfer to the pump.
• Electric wiring of the engine and auxiliary components should definitely comply with the local rules
and be performed by the authorized personnel.
• Never perform any work on the pump before the pump set is stopped completely.
ATTENTION
Always observe the following instructions to prevent any physical and/or property
damages.
