Standart Horizont CP190i, Руководство пользователя

Страница: 41 / 123

CP190i Page 43
4.0.8 User Points
This feature is used to search for User Points (Marks and Waypoints you have created
and stored) by name quickly and efficiently.
1. Press
[FIND] .
2. Move the ShuttlePoint knob to highlight USER POINTS and press [ENT] or move the
ShuttlePoint knob to the right.
3. The (Select Name) popup window will appear. This window will allow you to enter in the
name of the User Point you wish to locate.
Figure 4.0.8 - Find User Points (Marks and Waypoints)
4. Move the ShuttlePoint knob up/down to change each number or letter and left/right to
move to the next or previous position in the name of the Mark.
5. Once the name of the desired Mark reads in the (Select Name) window, press [ENT]
to show the location the Mark on the Chart page.
6. Press [CLR] at any time to return your cursor to your vessel’s position.
4.0.9 Coordinates
This feature allows you to enter Coordinates (Latitude/Longitude) and view the entered
position on the Chart page.
1. Press
[FIND] .
2. Move the ShuttlePoint knob to highlight COORDINATES and press [ENT] or move the
ShuttlePoint knob to the right.
3. A (Coordinate) popup window will be shown to allow you to enter in a specified Latitude
and Longitude.
Figure 4.0.9 - Find GPS Coordinates
4. Move the ShuttlePoint knob up/down to change each number or letter and left/right to
move to the next or previous position in the Coordinates.