Page 24
CP190i
3. CONTROLS AND INDICATORS
NOTE
This section defines each control of the CP190i. For instructions, refer to Getting Started and
Advanced Settings sections of this Owner's Manual.
NOTE
Throughout this Owner’s Manual same conventions are used. See the legend below:
[MENU]
If you see brackets around a bold and capital letter word this refers to a key press.
GENERAL SETUP
When a word(s) is bold capital letters and underlined, this refers to a menu
selection item.
3.0
CONTROLS AND CONNECTIONS
The CP190i is controlled by using the keys located on the front panel. These labelled keys
are dedicated to specific functions. As you press a key, a single audio beep confirms the
key action; every time a key press is not valid, three rapid beeps sound to indicate that the
key action is not valid. There is also a ShuttlePoint knob to move the cursor across the
screen.
The ZOOM IN and ZOOM OUT keys
·
Pressing
[ZOOM IN]
shows more details of a smaller area, by changing the chart scale
and zooming in on your display.
·
Press
[ZOOM OUT]
to change the scale and show a wider, otherwise less detailed
view.
·
Pressing and holding
[ZOOM IN]
/
[ZOOM OUT]
allows for quick zoom, that is the fast
change of the chart scale where only the land areas are drawn.
NOTE
The GPS Chart Plotter contains a World Wide background that allows you to zoom in to 2Nm. For
more detail, a C-MAP B
Y
J
EPPESEN
NT
+
/MAX C-CARD must be purchased and installed.
The ShuttlePoint knob
·
Moves the cursor around the Chart page (Cursor Mode) and pans the chart.
·
Used to scroll menu items. When in the menu, moving the ShuttlePoint knob to the right
enters a selection and moving the knob to the left clears the function.
·
Changes the GPS Chart Plotter from Home Mode to Cursor Mode on the chart screen
(for a detailed explanation refer to Par. 3.1.1
“Cursor VS Home Mode”
).
The ENT key
Press
[ENT]
to select the desired option or to confirm the selection.
The CLR key
·
When on the Chart page, press
[CLR]
to set Home Mode.
·
Press
[CLR]
to clear a selected function, step backwards in a menu or exit a menu.
The MENU key
·
Selects the Main Menu.
·
Pressing and holding
[MENU]
for 3 seconds allows you to change the fields contained
Содержание CP190i
Страница 1: ...Owner s Manual CP190i GPS Chart Plotters ...
Страница 8: ...Page 10 CP190i ...
Страница 99: ...CP190i Page 101 Figure 14 6 0 AIS Vessel Types ...
Страница 107: ...CP190i Page 109 Figure 16 4 2 Example of MOBilarm PTX List page ...
