Page 93
GX5500S
11.6 POSITION
REPLY
The
GX5500S
can be set up to automatically (default setting) or manu-
ally send your position when requested by another vessel. This selection is
important if you are concerned about someone polling the position of your
vessel that you may not want to. In the manual mode you will see the MMSI
or person’s name shown on the display allowing you to choose to send your
position to the requesting vessel.
5HIHUWRVHFWLRQ³
9.7.1 Setting up the Position Reply
” for setting.
11.7 DSC
BEEP
This feature allows the alarm beeps to be turned on (default setting) or off
when a DSC call is received. The DSC calls that can be customized are:
Individual, Group, All Ships, Position Request, Position Report, Geographical
Call using the procedure below:
1. Press and hold the
CALL
NH\ XQWLO ³
Setup Menu
”
appears.
-Setup Menu-
DSC Setup
Radio Setup
SELECT
[ENT]
QUIT
[CLR]
-DSC Setup-
Individual Ringer
Group Directory
SELECT
[ENT]
QUIT
[CLR]
Position Reply
Position Input
DSC Beep
-DSC Beep-
Individual
Select Call
On
Beep
SET
[ENT]
QUIT
[CLR]
2. Rotate
the
DI
AL
NQREWRVHOHFW³
DSC Setup
”.
3. Press
the
ENT
NH\WKHQVHOHFW³
DSC Beep
” with the
DI
AL
knob.
4. Press the
ENT
key, then rotate the
DI
AL
knob to
select the desired DSC call type and press the
ENT
key.
5. Rotate the
DI
AL
NQRE WR WXUQ ³
On
´ RU ³
Off
” the
DSC beep and press the
ENT
key.
6. Press the
CLR
key three times to return to radio
operation.