Standard Horizon QUANTUM GX5500S, Руководство пользователя

Страница: 86 / 124

GX5500S
Page 86
10.11 CHANNEL NAME
When in the radio mode, the display will show a name under the channel
number. This name describes the use of the channel. The radio has the
capability to customize the name by the procedure below.
Example
: CH69 PLEASURE to HOOKUP
1. Press and hold the
CALL
NH\ XQWLO ³
Setup Menu
”
DSSHDUV WKHQ VHOHFW ³
Radio Setup
” with the
DI
AL
knob.
DSC Setup
Radio Setup
SELECT
[ENT]
QUIT
[CLR]
-Setup Menu-
-Radio Setup-
Key Beep
SELECT
[ENT]
QUIT
[CLR]
CH Name
SCAN Type
SCAN Resume
Weather Alert
-CH Name-
16
Select CH
DISTRESS
CH Name
SET
[ENT]
QUIT
[CLR]
-CH Name-
69
Select CH
PLEASURE
CH Name
SET
[ENT]
QUIT
[CLR]
-CH Name-
69
Select CH
H LEASURE
CH Name
SET
[ENT]
QUIT
[CLR]
-CH Name-
69
Select CH
HOOKUP
CH Name
SET
[ENT]
QUIT
[CLR]
2. Press the
ENT
NH\WKHQVHOHFW³
CH Name
” with the
DI
AL
knob.
3. Press the
ENT
key.
4. Rotate the DI
AL
knob to select the channel to be
named, then press the
ENT
key.
5. Press an appropriate key on the keypad to enter
WKH¿UVWOHWWHURIWKHQHZFKDQQHOQDPH
6. Press the
ENT
key to store the first letter in the
name and step to the next letter to the right.
7. Repeat step 5 and 6 until the name is completed.
The name can consist of up to 16 characters, if
you do not use all 16 characters press the
ENT
key
to move to the next space. This method can also
be used to enter a blank space in the name. If a
mistake was made entering in the name repeat-
edly press the
H/L
key until the wrong character
is selected, then press an appropriate key to
correct the entry.
8. Press and hold the
ENT
key to save the name.
9. If you want to enter the name of another channel,
repeat steps 4 through 8.
10. Press the
CLR
key three times to return to radio
operation.