GX5500S
Page 56
9.5.4.2 Individual Call by Manually Entering a MMSI
You may enter an MMSI number manually to contact a vessel without storing
the MMSI in the individual/position call directory.
1. Press
the
CALL
NH\7KH³
DSC Menu
” will appear.
-DSC Menu-
SELECT
[ENT]
QUIT
[CLR]
Group
All Ships
POS Request
POS Report
Individual
-Individual Call-
SELECT
[ENT]
QUIT
[CLR]
Horizon
YAESU
Standard
Bob
Manual
-Individual Call-
Input MMSI
ID:
---------
SELECT
[ENT]
QUIT
[CLR]
-Individual Call-
Input MMSI
ID:34567
8
901
SELECT
[ENT]
QUIT
[CLR]
-Select Intership CH-
06
09
10
0
8
SELECT
[ENT]
QUIT
[CLR]
13
Name:
ID:34567
8
901
CH: 06
Transmit?
Category:Routine
YES
[ENT]
QUIT
[CLR]
-Individual Call-
Name:
ID:34567
8
901
Waiting for ACK
RESEND
[ENT]
QUIT
[CLR]
-Individual Call-
CH: 06
Since:01:03
Name:
ID:34567
8
901
CONNECTED
QUIT
[CLR]
-Individual Call-
CH: 06
Since:01:03
&RQILUP ³
Individual
” is selected. (To cancel,
press the
CLR
key.)
3. Press the
ENT
key. The individual directory will
appear.
4. Rotate the
DIAL
NQRE WR VHOHFW ³
Manual
”, then
press the
ENT
key.
5. Press an appropriate number key on the keypad
WRVHOHFWWKH¿UVWQXPEHURIWKH006,ZKLFK\RX
want to contact.
6. Repeat step 5 to set the MMSI number (nine
digits).
7. If a mistake was made entering in the MMSI
number, repeatedly press the
H/L
key until the
wrong digit is selected, then press an appropriate
number key to correct the entry.
:KHQ ¿QLVKHG HQWHULQJ WKH 006, QXPEHU SUHVV
and hold the
ENT
key.
9. Rotate the
DIAL
knob to select the operating
channel you want to communicate on, then press
the
ENT
key.
10. Press the
ENT
key to transmit the individual DSC
signal.
11. When an individual call acknowledgment is
received, press the
CLR
key to automatically
change to the channel which is selected on step 5
above and a ringing tone sounds.
12. Listen to the channel to make sure it is not busy,
then press the microphone’s
PTT
switch and talk
into the microphone to the other vessel.