Page 100
GX2200E
11 DSC SETUP
11.1 INDIVIDUAL DIRECTORY
The
GX2200E
has a DSC directory that allows you to store a vessel or
person’s name and the MMSI number associated with vessels you wish to
transmit individual calls, position requests and position report transmissions.
To transmit an individual call you must program this directory with information
of the persons you wish to call, similar to a cellular phones telephone directory.
Refer to section “
8.5.1 Setting up the Individual / Position Call Directory
”
for details.
11.2 INDIVIDUAL REPLY
This menu item sets up the radio to automatically or manually (default
setting) respond to a DSC Individual call requesting you to switch to a work-
ing channel for voice communications. When “Manual” is selected the MMSI
of the calling vessel is shown allowing you to see who is calling. This func-
tion is similar to caller id on a cellular phone.
Refer to section “
8.5.2 Setting up the Individual Call Reply
” for details.
11.3 INDIVIDUAL ACKNOWLEDGMENT
The radio can be setup to transmit a reply automatically (default) or set so
the radio will not reply to an individual call.
Refer to section “
8.5.3 Enabling the Individual Call Acknowledgment
” for
details.
11.4 INDIVIDUAL RINGER
The radio can be setup to ring like a telephone to alert you the radio received
a DSC individual call. The default setting is 2 minutes, however this can be
changed to 15, 10 or 5 seconds with the procedure below.
Refer to section “
8.5.6 Setting up the Individual Call Ringer
” for details.
11.5 GROUP DIRECTORY
For this function to operate, the same group MMSI must be programmed
into all the DSC VHF radios within the group of vessels that will be using this
feature.
Refer to section “
8.6.1 Setting up a Group Call
” for details.
