Standard Horizon HX870E, Руководство пользователя

Страница: 60 / 132

Page 60 HX870E
4. Press the [SELECT] soft key, then select “ POSITION
REPLY
” with the CH▼ / CH▲ key.
INDIVIDUAL DIR.
INDIVIDUAL REPLY
INDIVIDUAL ACK
INDIVIDUAL RING
GROUP DIR.
POSITION REPLY
AUTO POS POLLING
DSC SETUP
BACK SELECT
AUTO
BACK
DSC SETUP
MANUAL
ENTER
POSITION REPLY
5. Press the [SELECT] soft key, then press the CH▼ / CH▲
key to select “
AUTO
” or “
MANUAL
”. In “
AUTO
” mode, after a
DSC POS Request is received, the radio will automati-
cally transmit your vessels position. In “
MANUAL
” mode, the
display of the radio will show who is requesting the position.
6. Press the [ENTER] soft key to store the selected setting.
7. Press the CLR key to return to radio operation.
9.7.5 Setting up a Position Request Ringer
The HX870E has the capability to turn off the position request ringer.
1. Press the MENU key to display “
MENU
”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
ATIS SETUP
SELECT
GROUP DIR.
AUTO POS POLLING
AUTO POS TIME
CH SWITCH TIMER
NO ACT TIMER
POS FIX WAIT
DSC BEEP
DSC SETUP
BACK SELECT
INDIVIDUAL
BACK
DSC SETUP
GROUP
ALL SHIPS
POS REQUEST
POS REPORT
SELECT
DSC BEEP
ON
ON
ON
ON
ON
OFF
BACK
DSC BEEP
ON
ENTER
POS REQUEST
2. Press the CH▼ / CH▲ / ◄ / ► key to select
“ SETUP ”, then press the [SELECT] soft key.
3. Select “
DSC SETUP
” with the CH▼ / CH▲ key.
4. Press the [SELECT] soft key, then select
“ DSC BEEP ” with the CH▼ / CH▲ key.
5. Press the [SELECT] soft key, then select
“
POS REQUEST
” with the CH▼ / CH▲ key.
6. Press the [SELECT] soft key, then select
“
OFF
” with the CH▼ / CH▲ key.
7. Press the [ENTER] soft key to store the
selected setting.
8. Press the CLR key to return to radio operation.
To re-enable the ringer tone, repeat the above procedure, pressing the CH▼ /
CH▲ key to select “
ON
” in step 6 above.