FCC ID:K6630323X30
IC: 511B-30323X30
Vertex Standard Co.,Ltd.
9
the LCD). Pressing this key repeatedly scrolls through the preset memory channels.
5.
TX/BUSY Indicator
This indicator glows green when a signal is being received and red when transmitting. When
the Emergency feature is activated, this indicator blinks the internationally-recognized Morse
Code “S.O.S” message.
6.
Thermo Sensor
To measure a water temperature, soak this point in water several minutes.
NOTE
It may take a few minutes for the temperature register correctly.
NOTE
The temperature sensor may not display the correct temperature when the temperature of the
radios inside is high; for example, while the transmission mode or high receiver audio output.
7.
Microphone
The internal microphone is located here.
8.
Speaker
The internal speaker is located here.
9.
Battery Pack Lock (Bottom side)
Turn the Battery Pack Lock to the “OPEN” position for battery removal.
5.2 INDICATORS
1.
Information Bar
The temperature or battery voltage indicates here.
2.
“H”/“M”/“L” Indicators
“H” indicates High power (5 Watts); “M” indicates Medium power (2.5 Watts); and “L” is for
Low power (1 Watt). “Blank” in this location indicates Normal power (6 Watts).
3.
VOL Indicator
This indicator shows the receiver audio volume level.
4.
SQL Indicator
This indicator shows the squelch level.
5.
“SCN” Indicator
This indicator appears when the Scan is activated.
6.
“DW” Indicator
This indicator appears when the Dual Watch is activated.
7.
“P” Indicator
This indicator shows the channel is in the “Priority Channel”.
8.
USA/INTL/CAN Indicator
These indicators show the “band” of operation for the particular channel. “USA” indicates the