FCC ID:K6630323X30
IC: 511B-30323X30
Vertex Standard Co.,Ltd.
19
6.17.3 CALIBRATING WATER THERMAL SENSOR
If the temperature display is incorrect, it can be re-calibrated via Menu Mode.
1.
Turn the transceiver off.
2.
Hold down the [SQL] key, and then turn on the transceiver while still holding down the [SQL]
key.
3.
“SEt” will appear on the display, indicating that the Menu (“Set”) Mode has been activated.
4.
Press the [SQL] key to select the Menu item “04 tEP”.
5.
Press the [
T
] or [
S
] key to set the difference between HX760S display and the calibrated
thermometer.
For example, if the HX760S display shows
“
68.0 °F” and the (calibrated) thermometer
indicates “65.3 °F”, set the temperature offset to “–2.7 °F”.
6.
Press the [SQL] key to save the new setting, then press the PTT switch to exit to normal
operation.
NOTE
When change the temperature unit (“°F”
Æ
“°C” or “°C”
Æ
“°F” via Menu Mode, perform this
procedures.
NOTE
The temperature sensor may not display the correct temperature when the temperature inside the
radio is high; for example, while the transmission mode or high receiver audio output.
6.18 ENABLING S.O.S STROBE OPERATION
The S.O.S. STROBE feature utilizes the high-intensity strobe LED on the front of the HX760S as a
visual distress beacon. When enabled, the LED blinks the internationally-recognized Morse Code
“S.O.S.” message (... --- ...) at a rate of 5 words per minute. This can be very useful in summoning
help from rescuers who may not be able to communicate with you via radio.
1.
Hold down the [MEM] key while turning the radio on to activate the emergency S.O.S. Strobe.
Once the radio comes on, the BUSY/TX LED will flash the Morse Code S.O.S. message
repeatedly.
2.
The S.O.S. strobe function is interrupted when a signal is received or if the squelch control is
turned so audio is heard from the speaker.
3.
To disable the S.O.S. strobe function, turn the radio off and back on again.
7.
BH-1/BH-2/ Bluetooth
®
HEAD SET OPERATION
The optional BH-1/BH-2 Bluetooth
®
Head Set can communicate your voice and receiving signal
to/from the transceiver, with the Bluetooth
®
technology.
